BMX Pedal Install: How To

Pedal Installation Instructions

The pedal size is determined by what cranks you have. If you have one piece cranks then you will need to buy 1/2" pedals. If your cranks are two-piece or three-piece, then you will need to buy 9/16". If you need help determining what cranks you have, refer to the Crank FAQs.

What are the differences between molded pins and removable pins?

Molded pins are pins that are made onto the pedal during the molding process. Molded pins cannot be removed or replaced. Removable pins are usually longer and provide more grip than molded pins and can be removed or replaced.

What is the difference between platform pedals and clipless pedals?

A platform pedal is simply a platform you place your feet on. When pedaling with a platform pedal you simply press down(forward) on the pedal with your feet. A clipless pedal has a locking mechanism that will snap onto that pedals specific cleat. Cleats are the part of clipless pedals that bolt onto the bottom of a clipless shoe. Clipless pedals allow you to push down on your pedals with one foot as well as pulling up on the pedals with the opposing foot. This means you can push and pull in the same crank rotation, which generates more power and smoother rotation.

How do I get out of clipless pedals?

To get out of clipless pedals all you have to do is rotate the heel of your foot away from the bike. In a crash situation, this can be hard to remember and could result in your feet staying clipped in the pedals. With a little practice, you should be able to come out of your pedals in any situation.

How do I install my pedals?

Pedals are labeled Right and Left. The right pedal has right-handed (normal) threads and the left pedal has left-handed (reversed) threads. Check out the instructions listed below to install them properly.

Shop Pedals Here