The 2021 GT Performer BMX Bike is designed to be an affordable, long lasting bike that can keep up with the best of them. Fully sealed bearings, chromoly cranks and spindle, and integrated headtube create a bike that is both modern and durable without breaking the bank. 2.35" wide tires add even more freestyle points with added traction and a little cushion for hard landings. If you need a bike to shred on, the GT Performer will... well, perform.
Frame: GT Freestyle Design, High-Tensile Steel Tubes, Downtube Gusset
Fork: GT Freestyle Design, High-Tensile 2-Piece Steerer and Tapered Legs (31mm Offset)
Headset: Integrated Sealed Bearings (1-1/8") (45° x 45°)
Stem: GT Top Load, Cold-Forged Cap (50mm Reach) (32mm Rise)
Bars: GT Freestyle 2-Piece Steel (8.5" Rise) (29" Wide) (3° Up) (11° Back)
Grips: GT Super Soft, Single Compound, w/o Flange (155mm)
Bar Ends: GT Removable Plugs
Cranks: GT Power Series High-Tensile 3-Piece, Chromoly 8 Spline Spindle (170mm)
Bottom Bracket: Mid Sealed Bearing (19mm)
Pedals: GT Low Profile FS Platform, PP Material, Boron Axle
Chain: KMC S1
Sprocket: GT Steel (25 Tooth)
Front Hub: Steel Body, Sealed Bearings (3/8" Heat Treated Axle)
Rear Hub: Alloy Body, 1 Loose Ball/4 Sealed Bearings, Cassette (14mm Axle)
Driver: 9 Tooth
Front Rim: Alloy (Single Wall) (36 Hole)
Rear Rim: Alloy (Single Wall) (36 Hole)
Front Tire: GT LP-5 (20 x 2.35")
Rear Tire: GT LP-5 (20 x 2.35")
Seat: GT Padded (Pivotal)
Seat Post: Alloy Pivotal (25.4mm)
Seat Clamp: TBD
Brakes: Aluminum U-Brake w/ Soft Compound Pad
Brake Mounts: Welded
Gyro Tabs: Drilled
Headtube Angle: 75°
Seattube Angle: 71°
Stand Over Height: TBD
Bottom Bracket Height: 12"
Sizing Guideline: 5'3" to 5'9" Tall
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dan's Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.