The WeThePeople 2020 Trust FC BMX Bike is the same as the Trust except that the geometry has been finely tuned to dominate street riding. Utilizing a 20.75" top tube and 12.75" chain stay manuals, bunny hops, and 180's are easier than ever. Fakies are effortless due to the Saltplus Vertex freecoaster and grinds are buttery smooth with the Salt AM nylon pegs. Between all of the Eclat and Salt aftermarket components and pro level frame, the Trust FC will take you to greatness in the streets.
Frame: Full 4130 Chromoly, Tapered Seatstay and Chainstay (127mm Headtube)
Fork: Saltplus Trust, Full 4130 Chromoly, Butted Chromoly Steerer (22mm Offset)
Headset: Salt Pro Integrated Sealed
Stem: Eclat Onyx Cold-Forged Alloy Top Load (50mm Reach)
Bars: Saltplus HQ 2-Piece Full 4130 Chromoly
Grips: Eclat Shogun, Eclat Teck-Bolt Bar ends (Flangeless)
Cranks: Saltplus Elite tubular Profile 3-Piece, 4130 Chromoly, 48 Spline (170mm Length)
Bottom Bracket: Salt Mid Sealed (19mm)
Pedals: Saltplus Elite Nylon/Fiberglass
Chain: We The People Supply Chain (Z510HX)
Sprocket: Eclat Onyx Cold-Forged Alloy (25T)
Front Hub: Saltplus Trapez Alloy, Sealed Bearings, Female Bolts (3/8" Axle)
Rear Hub: Saltplus Vertex Freecoaster, Fully Sealed Bearings (14mm Axle)
Driver: 9T, 1-Piece Freecoaster, Sealed Bearings (Right Hand Drive)
Hubguards: Saltplus Pro Nylon/Fiberglass (4)
Front Rim: Eclat Trippin Double Wall (38mm Wide) (36h)
Rear Rim: Eclat Trippin Double Wall (38mm Wide) (36h)
Front Tire: Eclat Decoder (20 x 2.4")
Rear Tire: Eclat Decoder (20 x 2.4")
Seat: Eclat Bios (Fat Padded) (Pivotal)
Seat Post: Salt AM Pivotal Alloy (150mm)
Seat Clamp: We The People Logic 4130 Chromoly
Lever: Salt Moto Alloy
Brakes: Eclat Talon Alloy U-Brake
Brake Mounts: Removable Pivots and Guides
Gyro Tabs: Drilled (Not Included)
Extras: Salt AM Nylon (4.5" Long) (2)
Color: Trans Berry Pink
Weight: 27.58 lbs (without Brakes and with Pegs)
Headtube Angle: 75.5°
Seattube Angle: 71°
Stand Over Height: 9"
BB Height: 11.7"
Sizing Guideline: 5' 1" - 6' Rider Height
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.
This product was added to our catalog on March 4, 2020