The 2021 Sunday EX BMX Bike is pro-level bike for a killer price. As Julian Arteaga's signature bike, you will find a plethora of aftermarket components included on this build such as the Odyssey Path Pro tires, Sunday Saker cranks, and Odyssey braking system with removable mounts. Fully sealed bearings create a level of smoothness and reliability that is unmatched. For ultimate strength, Sunday constructed the frame, forks, bars, and cranks out of 100% chromoly. If you want to ride a bike that is pro-level and won't fold from going too big, check out the Sunday EX BMX Bike.
Raw and Translucent colors may show small veins or patches of surface rust under the finish. This is normal and does not affect the integrity of the product.
Frame: 100% Chromoly w/ Wave Downtube
Fork: Sunday EX 100% Chromoly w/ 2-Piece Steerer Tube and Welded Pre-Load (25mm Offset)
Bars: Sunday, 100% Chromoly 2-Piece
Stem: Sunday Freeze Top Load (48mm)
Headset: FSA Integrated Conical (1-1/8")
Top Cap: Sunday M16, Aluminum
Grips: Odyssey Broc Raiford
Cranks: Sunday Saker (175mm Length)
Bottom Bracket: Sealed Mid (19mm)
Pedals: Odyssey Twisted PC Pro
Chain: KMC Z1 Wide
Sprocket: Sunday Sabertooth v2, 6061 Aluminum (25 Tooth)
Front Hub: Sunday Low-Flange Sealed (3/8" Female Axle)
Rear Hub: Sunday Sealed Cassette (3/8" Female Axle)
Driver: 9 Tooth
Spokes: Steel, Black (14 Gauge)
Front Rim: Sunday Lightning (20") (36 Hole)
Rear Rim: Sunday Lightning (20") (36 Hole)
Front Tire: Odyssey Path Pro OEM (20 x 2.4")
Rear Tire: Odyssey Path Pro OEM (20 x 2.4")
Seat: Sunday Badge (Pivotal)
Seat Post: Sunday (Pivotal)
Seat Clamp: Sunday
Lever: Odyssey Springfield
Brake Cable: Odyssey Quik Slic
Brakes: Odyssey Springfield U-Brake
Brake Mounts: Removable
Gyro Tabs: Drilled
Color: Matte Raw
Weight: 25.75 lbs
Headtube Angle: 75°
Seattube Angle: 71°
Chainstays: 13.2" - 13.5"
BB Height: 11.5"
Stand Over Height: 9"
Sizing Guideline: 5' 9" - 6' 3"+ Rider Height
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.
This product was added to our catalog on October 2, 2020
I ride HARO myself so this was a new venture for us both as I rode HARO as a kid and so it was nice to read up on the SUNDAY / ARTEAGA and see these guys shredding on this bike so it’s gotta be strong.
There’s also a suprise detail on the frame not seen in pics so that was cool and that’s all the hints I’m putting out.
Overall this bike is well worth the money and is tight and well designed. Would buy again ??
When fully assembled, and brakes removed it looks absolutely stunning.
The geometry is great, for a taller rider as well. Rear end feels snappy and sharp. Front end is very responsive and comfortable.
I am 6ft2 and just installed 10" inch handle bars and It is extremely comfortable.
Would absolutely give 5 stars, if not for the single wall rims.
Highly highly recommended bike!!!