SE Racing Dblocks Big Ripper 29" BMX Bike Description:
The SE 2022 Dblocks Big Ripper 29" BMX Bike is one you won't want to miss out on. This bike is the signature ride of the king of the streets, Darnell Meyers, aka Dblocks. The 6061 Alloy frame dawns floval tubing, the classic looptail rear end, wide rear stays, and retro dropouts. This Dblocks Wheelie King Model features a 36 x 17 gear ratio to keep those wheelies going for "blocks".
Features:
- Retro 6061 aluminum Big Ripper frame with floval tubing and looptail rear end, American bottom bracket and classic PK Ripper wishbone plate
- Full Chromoly Landing Gear forks
- Chromoly Power Wing cruiser bars
- Double-wall rims with sealed-bearing, high-flange hubs
- SE 3-piece V-Ridge cranks with alloy SE sprocket
- Authentic ODI Mushroom II grips with 45 Years of Radness SE donuts
- New York Flyer Seat with super grippy top cover and bottle opener
- Freedom ThickSlick Comp
- SE Wheelie pegs
Specifications:
- Frame: Dblocks Wheelie King Model, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
- Fork: Full Chromoly Landing Gear forks
- Headset: Tange Threadless (1-1/8")
- Stem: Retro Alloy Top-Load with Engraved SE Logo and Lightweight Cutouts (55mm reach)
- Bars: Chromoly Power Wing Cruiser Bar (28" Wide), (7" Rise), (10° Backsweep), (1° Upsweep)
- Grips: Special Edition ODI Mushroom II Dual-Ply Grips with 45 Years of Radness SE Donuts
- Cranks: SE V-Ridge 3-piece Chromoly (175mm Length) (160mm Spindle Length)
- Bottom Bracket: Sealed American Bottom Bracket with (19mm spindle diameter)
- Pedals: Wellgo Low-profile Platform
- Sprocket: SE Racing Sprocket (36T)
- Chain: KMC S1
- Front Hub: Sealed Bearing (36H) High-Flange Alloy Shell (3/8")
- Rear Hub: Sealed Bearing (36H) High-Flange Alloy Shell (3/8") Flip Flop
- Driver: Freewheel (17T)
- Front Rim: Double-wall (36 Hole)
- Rear Rim: Double-wall (36 Hole)
- Front Tire: Freedom ThickSlick Comp, (29" x 2.4")
- Rear Tire: Freedom ThickSlick Comp, (29" x 2.4")
- Seat: Raise It Up Flyer Seat with Custom SE Bottle Opener Brace (Railed)
- Seat Post: Micro-Adjust Alloy, (27.2mm diameter)
- Seat Clamp: SE Racing Champ Clamp, (31.8mm inner diameter)
- Brake Lever: Tektro 316A, 2-Finger Alloy
- Brakes: Tektro 855AL V-Brake w/ Linear Cable
- Gyro: -
- Gyro Tabs: -
- Brake Mounts: Welded
- Extras: Custom Dblocks Sticker Sheet, Alloy Valve Caps, SE Wheelie pegs
- Color: Blue Gold Camo
- Weight: 30.5 lbs
Geometry:
- Toptube Length: 23.6"
- Chainstay Length: 18.25"
- Headtube Angle: 71°
- Seattube Angle: 71°
- Bottom Bracket Height: 12.25"
- Standover: 30.75"
- Recommended Sizing Guide: 5'5" (165cm+) And Up
For assistance building your new bike, please check out our tech help section here for instructions and tips on how to build your bike to ensure it is safe.
Dan's Comp recommends riding with a helmet to protect that brain. Shop our selection of freestyle helmets here.
Need help finding the right bike for you? Not sure what size would suit you best? Check out our BMX buyers guide video below!
Note: To ensure that every component on your bicycle is working properly, Dan's Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.
This product was added to our catalog on February 1, 2024