Haro Bikes 2020 Thread Slope Dirt Jumper 26" Bike (22.6" TT) (Cool Grey)

This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow using discount coupons
Low Price: $2,499.99
 
Discontinued Online

The Haro Thread Slope is the quintessential dirt jumper. Haro constructed this model to have 100mm of travel up front using the Manitou Circus Expert fork and 80mm of travel in the rear utilizing the Rockshox RS Deluxe Rear Shock. To maintain a simple and clean single speed set up, the pivot position of the rear suspension was designed into the bottom bracket. The FSA Gradient line was used for the stem, bars and cranks to create a solid foundation for rider contact points and the gyro to hydraulic TRP HY/RD-C disc brake tailspins and barspins can be done back to back without worrying about the brake cable. Without a doubt, the Thread Slope is the pinnacle of Haro's dirt jumper line.

FRAME: Haro Full X6 Alloy Thread Slope Dual Suspension with Internal Headtube, Euro BB, and ISCG Mount
FORK: Manitou Circus Expert with Tapered Steerer Tube (100mm Travel) (20mm Thru Axle)
FRAME SHOCK: Rockshox RS Deluxe R (190x45mm Debonair) (2 Tokens) (MM Tune)
HEADSET: FSA 1-1/8" - 1.5" with Top & Lower Bearings(# 57)
STEM: FSA Gradient 1-1/8" (45mm Reach)
BARS: FSA Gradient Riser (25mm Rise) (9° Backsweep) (6° Upsweep) (31.8mm Clamp)
GRIPS: Velo Lock-On
CRANKS: FSA Gradient Modular 1X Direct Mount (170mm Length)
BOTTOM BRACKET: FSA Sealed (BB-392-EVO)
PEDALS: Haro SD Nylon with Sealed Bearings
CHAIN: KMC Z1 HX 1/2" x 1/8"
SPROCKET: Megatooth 30T Forged Alloy Chainring
FRONT HUB: Pivot Sealed Bearing (20mm Thru-Axle) (32H)
REAR HUB: Pivot Alloy Sealed Bearing Disc Singlespeed Cassette with Chromloy Axle (32mm)
DRIVER: 14T Chromoly Cog
FRONT RIM: Spank Industries Spoon Alloy Double Wall (32H)
REAR RIM: Spank Industries Spoon Alloy Double Wall (32H)
FRONT TIRE: Kenda Small Block 8 26" x 2.35" (60TPI)
REAR TIRE: Kenda Small Block 8 26" x 2.10" (60TPI)
SEAT: Haro Pivotal with Hollow Bolt
SEAT POST: Alloy 31.6mm Pivotal
SEAT CLAMP: Pivit Alloy 35mm
LEVER: Odyssey Trigger
BRAKES: TRP HY/RD-C Cable/Hydraulic Disc Brake (160mm)
BRAKE MOUNTS: Disc (IS Rear Mount)
GYRO TABS: Drilled
EXTRAS: N/A
Color: Cool Grey  
WEIGHT: 28.7 lbs

Frame Specs
Toptube: 22.6" 
Headtube Angle: 69°
Seattube Angle: 67°
Stand Over Height: 28"
BB Height:
Chainstays: 15.4"
Sizing Guideline:

Need help building your complete bike? Check out our bike build video below.

NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.

This product was added to our catalog on February 19, 2020