Haro Bikes 2020 Steel Reserve 1.1 Dirt Jumper 26" Bike (22.8" TT) (Matte Black)

This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow using discount coupons
Low Price: $579.99
 
Discontinued Online

The Haro Steel Reserve 1.1 DJ 26" Bike is Haro's entry point into the Dirt Jumper scene. It is designed and built to be able to ride both parks and trails. The frame, forks, and cranks are full chromoly while the wheels come with double wall rims to be able to handle hard landings from going big. This bike comes equipped with a rear disc brake and the headtube is even drilled for gyro compatibility. Haro realized that after riding for a bit, a suspension fork might pop up on your wish list, so they made sure to design the frame and forks to have suspension correct geometry. With all of the features that Haro has included, it's pretty obvious to us that the Steel Reserve 1.1 is a killer deal.

FRAME: Haro Full Chromoly with Internal Headtube & Euro BB Shell
FORK: Rigid Chromoly with Disc Brake Tab (Suspension Correct Geometry)
HEADSET: 1-1/8" Alloy Semi-Cartridge (VP-A46ACM)
STEM: Haro Front Load
BARS: Haro Steel (730mm Wide) (65mm Rise) (6° Backsweep)
GRIPS: Haro Counterfeit
CRANKS: Haro Chromoly 3-Piece 8 Spline
BOTTOM BRACKET: Sealed Euro
PEDALS: Wellgo Platform Alloy with Replaceable Pins
CHAIN: KMC S1 1/2" x 1/8"
SPROCKET: 28T
FRONT HUB: Alloy Shell with Chromoly Axle
REAR HUB: Pivot Alloy Disc Singlespeed Cassette with Chromloy Axle
DRIVER: 14T Chromoly Cog
FRONT RIM: Weinmann XM260 Alloy Double Wall (36H)
REAR RIM: Weinmann XM260 Alloy Double Wall (36H)
FRONT TIRE: Kenda K-Rad 26 x 2.3"
REAR TIRE: Kenda K-Rad 26 x 2.3"
SEAT: Haro Padded Slim 1-Piece Combo
SEAT POST: Alloy 25.4mm Combo
SEAT CLAMP: Pivit Alloy 28.6mm
LEVER: Tektro ML-520-RS
BRAKES: Tektro Aries MD-M280
BRAKE MOUNTS: Disc
GYRO TABS: Drilled
EXTRAS: N/A
Color: Matte Black
WEIGHT: 29.1 lbs

Frame Specs
Toptube: 22.8"
Headtube Angle: 69°
Seattube Angle: 70°
Stand Over Height: 26.7"
BB Height:
Chainstays: 15.7"
Sizing Guideline:

Need help building your complete bike? Check out our bike build video below.

NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.

This product was added to our catalog on February 19, 2020