Haro Bikes 2020 Racelite Junior BMX Bike (18.3" Toptube) (Black)

The Haro Bikes 2020 Racelite Junior BMX Bike share's the same wheel and frame size as the Race Lite line's mini model, but the 3-piece alloy cranks and alloy bars have been increased in size to accommodate riders around 4'5" to 4'9" tall. Sealed bearings in the wheels and cranks insure that this bike will last through rough riding. A 100% chromoly fork also contributes to the Racelite Junior bike's durability. Whether on or off the track, this bike will perform flawlessly.

FRAME: 6061 Aluminum w/Integrated Headtube, Internal Cable Routing, & Smooth Welding (18.3" Toptube) 

FORK: Threadless Chromoly (1") 

HEADSET: Integrated (1") 

STEM: Forged Alloy Top Load (45mm Reach) 

BARS: Alloy Bar (5" Rise) 

GRIPS: Mini Micro-Knurl 

CRANKS: 3-piece Alloy Race (145mm) 

BOTTOM BRACKET: Sealed Bearing Euro Square Taper 

PEDALS: Mini DX Alloy (9/16") 

SPROCKET: 38T Alloy 

CHAIN: KMC Z33 

FRONT HUB: Sealed Bearing Low Flange Alloy 28h (3/8") 

REAR HUB: Sealed Bearing Low Flange Alloy Cassette 28h (3/8") 

DRIVER: 14T 

FRONT RIM: 20" Alloy Double Wall 28h 

REAR RIM: 20" Alloy Double Wall 28h 

FRONT TIRE: Kenda "Kompact" 20x1-1/8" 

REAR TIRE: Kenda "Kompact" 20x1-1/8" 

SEAT: Unibody 

SEAT POST: Alloy (22.2mm) 

SEAT CLAMP: Alloy (25.4mm) 

BRAKE LEVER: Promax XL-373 Two Finger 
BRAKES: Promax MV85 Mini V-brake  
BRAKE MOUNTS: Welded   
EXTRAS: No   
WEIGHT: 17 lbs 

Frame Specs 

Toptube: 18.3" 
Headtube Angle: 73° 
Seattube Angle: 71° 
Seattube Height: 9.2"    
BB Height: 11" 
Chainstays: 13.6" 
Sizing Guide: 4'5" - 4'9" Rider Height 

Need help building your complete bike? Check out our bike build video below.

Dan's Comp has a large selection of BMX Safety Gear including a full range of BMX Helmets to best fit you and your riding style. Ride hard and stay safe!

NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.