The 2021 GT Lil Performer 16" BMX Bike is a great starter bike for younger riders starting their venture into freestyle BMX, or just needing a bike to ride around the neighborhood. Traditional components such as loose ball bearings for the headset, bottom bracket, and hubs make maintenance easy and create less friction so that the bike isn't actively working against the rider. 3-piece cranks and modern gearing make sure that the rider feels right at home at the skate park. The GT Lil Performer 16" will provide tons of fun.
Frame: GT Freestyle Design, High-Tensile Steel Tubes, Downtube Gusset
Fork: GT Freestyle Design, High-Tensile 2-Piece Steerer and Tapered Legs (31mm Offset)
Headset: External Threadless (1-1/8")
Stem: GT Top Load, Cold-Forged Cap (40mm Reach) (32mm Rise)
Bars: GT Freestyle 2-Piece Steel (7" Rise) (23.625" Wide) (3° Up) (11° Back)
Grips: Mushroom Style, Soft Compound, w/o Flange (100mm)
Bar Ends: GT Removable Plugs
Cranks: GT Power Series High-Tensile 3-Piece, Chromoly 8 Spline Spindle (127mm)
Bottom Bracket: American Loose Ball (19mm)
Pedals: GT Low Profile FS Platform, PP Material, Boron Axle
Chain: KMC S1
Sprocket: GT Steel (25 Tooth)
Front Hub: Steel Body, Loose Ball Bearings (3/8" Heat Treated Axle)
Rear Hub: Alloy Body, 1 Loose Ball/4 Sealed Bearings, Cassette (14mm Axle)
Driver: 9 Tooth
Front Rim: Alloy (Single Wall) (20 Hole)
Rear Rim: Alloy (Single Wall) (20 Hole)
Front Tire: Innova (16 x 2.1")
Rear Tire: Innova (16 x 2.1")
Seat: Integrates Saddle w/ Post (Combo)
Seat Post: Integrated Alloy (25.4mm)
Seat Clamp: TBD
Brakes: Aluminum U-Brake w/ Soft Compound Pad
Brake Mounts: Welded
Gyro Tabs: Drilled
Headtube Angle: 74°
Seattube Angle: 71°
Stand Over Height: TBD
Bottom Bracket Height: 9.6"
Sizing Guideline: 3'2" to 4' Tall
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dan's Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.