BSD XLT Revolution Freecoaster Rear Wheel (Black) (LHD) (20 x 1.75)

The BSD Revolution XLT Freecoaster Rear Wheel is full of futuristic technology to make sure that rolling fakie is as smooth as it gets. Utilizing their "revolutionary" freecoaster hub, pedal slack is a thing of the past. Rolling direction is the dictating part of whether the freecoaster is engaged or disengaged allowing the use of pawls instead of traditional freecoast clutches. Paired with the lightweight BSD XLT rim, this wheel will take your riding to new heights!

BSD Revolution Hub
The future is here with the BSD Revolution Freecoaster Hub! BSD have utilized a "revolutionary" planetary clutch system that allows this hub to use pawls, much like a cassette, producing almost instant engagement and eliminating pedal gap when pedaling forward. This system also eradicates unwanted engagement during fakies creating a more consistent experience. Essentially, instead of pedaling dictating whether the hub is engaged or disengaged, it is the rolling direction of the wheel that decides this. Rolling forward? Engaged. Rolling backward? Disengaged. Another benefit of this design is that axial forces are greatly reduced which permits the use of standard sized bearings making the weight of this hub more in line with that of a cassette. No longer must we put up with sloppy engagement, heavy hubs, or finnicky designs like most freecoasters provide. Long live the Revolution!

Check out this sick video to see how it works and rides. Want your mind blown? Check out the 5:23 mark.

Features:

• The Revolution hub is 30% lighter than conventional freecoaster hubs
• XLT rim is laced to the hub in a 4 cross pattern
• The XLT rim features an X-section center brace, tapered sidewalls & tapered spoke seats
• No gap when pedaling forward
• Eradicates unwanted engagement on rollbacks
• Feels and sounds like a cassette hub
• No need for oversized hub bearings due to low axial load
• Super-tough hollow male 14mm chromo axle
• BSD drive side and non-drive side hubguards included
• BSD rim tape included

Wheel Specifications:
Hub: BSD Revolution
Drive Side: Right Hand Drive
Rim: BSD XLT
Spokes: 190mm
Lacing Pattern: 4 Cross
Rim Tape: BSD

Hub Specifications:
Drive Side Flange Diameter: 67mm
Drive Side Spoke Hole Pitch Circle Diameter: 58mm
Non-Drive Side Flange Diameter: 54mm
Non-Drive Side Spoke Hole Pitch Circle Diameter: 45mm
Center to Flange: 26mm
Clutch: Planetary System
Shell: 6061-T6 Alloy Drilled For 36 Spokes
Axle: Hollow 14mm 4140 Heat Treated Chromo w/ 6mm Hex Ends
Wheel Nuts: 4130 Heat Treated Chromo
Drive Side: Right Hand Drive
Drive Side Hubguard: Jersey Barrier Drive Side
Non-Drive Side Hubguard: Jersey Barrier West Coaster Plastic Only
Weight: 20 oz (w/ Hubguards)

Rim Specifications:
Material: 6061-T6 Aluminum
ERD: 
Width: 34mm
Rim Height: 19mm
Weight: