Brake Installation Instructions
How do I install my brakes?
see detailed instructions of the brake installations, click on a link below.
Linear Pull Brake
What type of brakes do I need for my bike?
There are two types of brakes commonly found on BMX bikes. Most street/trails frames use 990 style or U-brakes while
most race frames use linear pull or V-brakes. U-brakes and V-brakes can not be used interchangeably. The location of
the brake mounts in relation to the rim determines what brake is needed. If the brake bosses are mounted on top of
the seat stays chances are you need V-brakes. If the brake mounts are located on top of the chainstays or on the
bottom of the seat stays you probably need U-brakes.
What if my frame does not have brake mounts?
Some older frames do not come with brake mounts welded to the frame. Traditionally, these frames were designed to
use caliper style brakes. If you wish to upgrade the brakes on your older frame a U-brake or V-brake plate can be
used to run the corresponding brakes.
How can I make my brakes work better?
There are several different ways to improve braking performance. The first is to make sure your brakes are adjusted
properly and the brake pads are making full contact with the rim. You can also increase braking performance by
running a softer and larger brake pad. Keep in mind that chrome rims offer better braking performance than silver or
What do I need to know when ordering new brake pads?
When ordering new brake pads you will need to know if you have threaded or non-threaded brake pads. Threaded brake
pads are the most common and found on both U-brakes and V-brakes.
Threaded Brake Pads
Non-Threaded Brake Pads
What are the different types of brakes?
There are Caliper, U-Brakes, and V-Brakes. To see the different types of Brakes that are available, Click Here.